The matrix
below is a subset of the total features available with the P.R.Editor
XR range. Please consult your local distributor for full details.
| Feature |
XR
5000
HS |
XR 5000 |
XR
2000
HS |
XR
2000
S |
XR 2000 |
XR
2000 L6 / XR 2000 L4 |
XR
2000
Interactive |
| Layer Limitation |
Unlimted |
Unlimted |
Unlimited |
Unlimited |
Unlimted |
6
/ 4 respectively |
Unlimited |
| Analysis |
| Characteristic impedance based on field
solver results |
|
|
|
|
|
|
|
| Crosstalk based on formulae (field solver
results used in formula) |
|
|
|
|
|
|
|
| Field solution from layer stack (.mlt generation) |
|
|
|
|
|
|
|
| IBIS model import |
|
|
|
|
|
|
|
| Overshoot based on formulae (field solver
results used in formula) |
|
|
|
|
|
|
|
| Simulation library manager |
|
|
|
|
|
|
|
| Constraint
Management |
| Buses in tree view/bus level constraints |
|
|
|
|
|
|
|
| Color-coded
results measured against constraints with error and warning
indication |
|
|
|
|
|
|
|
| Crosstalk
per aggressor results in the spreadsheet |
|
|
|
|
|
|
|
| Differential
pairs in tree view |
|
|
|
|
|
|
|
| Library reload (simulation models) |
|
|
|
|
|
|
|
| Net classes in the tree view (electrical
and logical) |
|
|
|
|
|
|
|
| Nominated drivers |
|
|
|
|
|
|
|
| Pin pairs |
|
|
|
|
|
|
|
| High-Speed
Route/Place |
| Routing constraint indicators |
|
|
|
|
|
|
|
| Crosstalk
resolve |
|
|
|
|
|
|
|
| Delay
routing |
|
|
|
|
|
|
|
| Deviation (%) control - delay |
|
|
|
|
|
|
|
| Deviation (%) control - length |
|
|
|
|
|
|
|
| Differential Pair Routing (Manual) |
|
|
|
|
|
|
|
| Heads-up
display for interactive routing (delay) |
|
|
|
|
|
|
|
| Heads-up
display for interactive routing (length) |
|
|
|
|
|
|
|
| Heads-up
display for interactive routing (impedance, overshoot, crosstalk) |
|
|
|
|
|
|
|
| (Characteristic) CharZ
impedance calculator |
|
|
|
|
|
|
|
| Key Remapping |
|
|
|
|
|
|
|
| Length checks (pin-based including pin
length groups) |
|
|
|
|
|
|
|
| Length
Routing |
|
|
|
|
|
|
|
| Lengthen tool (manual) for delay |
|
|
|
|
|
|
|
| Lengthen tool (manual) for length |
|
|
|
|
|
|
|
| Lengthen
during autorouting (delay) |
|
|
|
|
|
|
|
| Lengthen
during autorouting (length) |
|
|
|
|
|
|
|
| Lengthening Wizard |
|
|
|
|
|
|
|
| Locate crosstalk |
|
|
|
|
|
|
|
| Locate differential pairs |
|
|
|
|
|
|
|
| Ordered/controlled topology obedience |
|
|
|
|
|
|
|
| Report (differential pairs) |
|
|
|
|
|
|
|
| Shielding
tool |
|
|
|
|
|
|
|
| Skew Groups |
|
|
|
|
|
|
|
| Physical
Design |
| Acid-trap removal |
|
|
|
|
|
|
|
| Activ-45
manual routing |
|
|
|
|
|
|
|
| Align Components during Move |
|
|
|
|
|
|
|
| Angled autorouting (45) |
|
|
|
|
|
|
|
| Angled
autorouting (free angle) |
|
|
|
|
|
|
|
| Bus Routing (Track following) |
|
|
|
|
|
|
|
| Bus Routing (Concurrent) |
|
|
|
|
|
|
|
| Change Route Layer |
|
|
|
|
|
|
|
| Copper
pour |
|
|
|
|
|
|
|
| Cost Editing (Autorouting) |
|
|
|
|
|
|
|
| Curved
routes |
|
|
|
|
|
|
|
| DRC
checks |
|
|
|
|
|
|
|
| Dynamic
length report |
|
|
|
|
|
|
|
| Equispace (90-degree routing) |
|
|
|
|
|
|
|
| Footprints |
|
|
|
|
|
|
|
| Freehand routing & tidy |
|
|
|
|
|
|
|
| Grid control for routes & vias |
|
|
|
|
|
|
|
| Group move of components/tracks |
|
|
|
|
|
|
|
| Hierarchical design rules |
|
|
|
|
|
|
|
| Interactive lengthening |
|
|
|
|
|
|
|
| Interactive lengthening to constraints |
|
|
|
|
|
|
|
| Interactive
placement tools |
|
|
|
|
|
|
|
| Join route |
|
|
|
|
|
|
|
| Jumpers |
|
|
|
|
|
|
|
| Layer
bias controls |
|
|
|
|
|
|
|
| Layer
routing (net_layer) |
|
|
|
|
|
|
|
| Memory
pattern router |
|
|
|
|
|
|
|
| Miter tool |
|
|
|
|
|
|
|
| Move,
rotate, swap component |
|
|
|
|
|
|
|
| Move Tool |
|
|
|
|
|
|
|
| Multipass
routing |
|
|
|
|
|
|
Single
pass |
| On-line
DRC for placement |
|
|
|
|
|
|
|
|
On-line DRC for routing |
|
|
|
|
|
|
|
| Optimal
route spacing |
|
|
|
|
|
|
|
Plot |
|
|
|
|
|
|
|
| Powerplane Display support |
|
|
|
|
|
|
|
| Pull tight (90º, 45º 0º) |
|
|
|
|
|
|
|
| Push-aside
& Springback components |
|
|
|
|
|
|
Limited
to 2 - no springback |
| Push-aside
& Springback routes |
|
|
|
|
|
|
|
| Pushing at 45 degrees |
|
|
|
|
|
|
|
| Python scripting interface |
|
|
|
|
|
|
|
| Remote
Selection from Schematics |
|
|
|
|
|
|
|
| Reports |
|
|
|
|
|
|
|
| Routing Wizard |
Full |
Partial |
Partial |
Partial |
Partial |
Partial |
Partial |
| River
Router |
|
|
|
|
|
|
|
| Routability
Analysis |
|
|
|
|
|
|
|
| Route from Other End |
|
|
|
|
|
|
|
| Rules-by-Area |
|
|
|
|
|
|
|
| Same net spacing controls |
|
|
|
|
|
|
|
| Security copies |
|
|
|
|
|
|
Timed-save only |
| Best-pass autorouting auto-save |
|
|
|
|
|
|
|
| Separation measurement tool |
|
|
|
|
|
|
|
| Smoothing – automatic
via-reduction |
|
|
|
|
|
|
|
| SMD-pad special vias |
|
|
|
|
|
|
|
| Snap-vias-Legal |
|
|
|
|
|
|
|
| Split
Power-plane creation |
|
|
|
|
|
|
|
| Teardrop tools |
|
|
|
|
|
|
|
| Testpoints |
|
|
|
|
|
|
|
| Tidy Route |
|
|
|
|
|
|
|
| Trunk routing / editing |
|
|
|
|
|
|
|
| Trunk-end routing |
|
|
|
|
|
|
|
| Unmiter tool |
|
|
|
|
|
|
|
| Variant support |
|
|
|
|
|
|
|
| Back
to CADSTAR P.R.Editor XR |
|
|
|
|
|
| Feature |
XR
2000
Embedded |
XR
2000
Interactive Embedded |
| Layer Limitation |
Unlimted |
Unlimted |
| Analysis
|
| Characteristic impedance based on field solver
results |
|
|
| Crosstalk based on formulae (field solver results
used in formula) |
|
|
| Field solution from layer stack (.mlt generation) |
|
|
| IBIS model import |
|
|
| Overshoot based on formulae (field solver results
used in formula) |
|
|
| Simulation library manager |
|
|
| Constraint Management
|
| Buses in tree view/bus level constraints |
|
|
| Color-coded results measured against constraints
with error and warning indication |
|
|
| Crosstalk per aggressor results in the spreadsheet |
|
|
| Differential pairs in tree view |
|
|
| Library reload (simulation models) |
|
|
| Net classes in the tree view (electrical and logical) |
|
|
| Nominated drivers |
|
|
| Pin pairs |
|
|
| High-Speed Route/Place
|
| Routing constraint indicators |
|
|
| Crosstalk resolve |
|
|
| Delay routing |
|
|
| Deviation (%) control - delay |
|
|
| Deviation (%) control - length |
|
|
| Differential Pair Routing (Manual) |
|
|
| Heads-up display for interactive routing (delay) |
|
|
| Heads-up display for interactive routing (length) |
|
|
| Heads-up display for interactive routing (impedance,
overshoot, crosstalk) |
|
|
| (Characteristic) impedance calculator |
|
|
| Key Remapping |
|
|
| Length checks (pin-based including pin length groups) |
|
|
| Length Routing |
|
|
| Lengthen tool (manual) for delay |
|
|
| Lengthen tool (manual) for length |
|
|
| Lengthen during autorouting (delay) |
|
|
| Lengthen during autorouting (length) |
|
|
| Lengthening Wizard |
|
|
| Locate crosstalk |
|
|
| Locate differential pairs |
|
|
| Ordered/controlled topology obedience |
|
|
| Report (differential pairs) |
|
|
| Shielding tool |
|
|
| Skew Groups |
|
|
| Physical Design |
|
|
| Acid-trap removal |
|
|
| Activ-45 manual routing |
|
|
| Align Components during Move |
|
|
| Angled autorouting (45) |
|
|
| Angled autorouting (free angle) |
|
|
| Bus Routing (Track following) |
|
|
| Bus Routing (Concurrent) |
|
|
| Change Route Layer |
|
|
| Copper pour |
|
|
| Cost Editing (Autorouting) |
|
|
| Curved routes |
|
|
| DRC checks |
|
|
| Dynamic length report |
|
|
| Equispace (90-degree routing) |
|
|
| Footprints |
|
|
| Freehand routing & tidy |
|
|
| Grid control for routes & vias |
|
|
| Group move of components/tracks |
|
|
| Hierarchical design rules |
|
|
| Interactive lengthening |
|
|
| Interactive lengthening to constraints |
|
|
| Interactive placement tools |
|
|
| Join route |
|
|
| Jumpers |
|
|
| Layer bias controls |
|
|
| Layer routing (net_layer) |
|
|
| Memory pattern router |
|
|
| Miter tool |
|
|
| Move, rotate, swap component |
|
|
| Move Tool |
|
|
| Multipass routing |
|
Single Pass |
| On-line DRC for placement |
|
|
| On-line DRC for routing |
|
|
| Optimal route spacing |
|
|
Plot |
|
|
| Powerplane Display support |
|
|
| Pull tight (90º, 45º 0º) |
|
|
| Push-aside & Springback components |
|
|
| Push-aside & Springback routes |
|
|
| Pushing at 45 degrees |
|
|
| Python scripting interface |
|
|
| Remote Selection from Schematics |
|
|
| Reports |
|
|
| Routing Wizard |
|
|
| River Router |
|
|
| Routability Analysis |
|
|
| Route from Other End |
|
|
| Same net spacing controls |
|
|
| Security copies |
|
|
| Best-pass autorouting auto-save |
|
|
| Separation measurement tool |
|
|
| Smoothing – automatic via-reduction |
|
|
| SMD-pad special vias |
|
|
| Snap-vias-Legal |
|
|
| Split Power-plane creation |
|
|
| Teardrop tools |
|
|
| Testpoints |
|
|
| Tidy Route |
|
|
| Trunk routing / editing |
|
|
| Trunk-end routing |
|
|
| Unmiter tool |
|
|
| Variant support |
|
|
| Back
to CADSTAR P.R.Editor XR |
|
|